1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > common mode choke coil > wire wound type for large current 2012.3.1 o this data sheet is applied for chip common mode choke coil used for general electronics equipment for your design. common mode choke coil wire wound type for large current dlw5bt series (2020 size) c dimensions (l) 5.00.3 3.60.3 (w) 5.00.3 0.5 min. 0.45 min. 1.70.3 (2) (1) (4) (3) 1.70.3 1.30.3 0.90.3 * the marking to indicate the product direction can be applicable. (optional) 1.30.3 (in mm) : electrode polarity marking (t) 2.350.15 c impedance-frequency characteristics (main items) impedance ( ) frequency (mhz) 1 10 100 1000 10000 1 10 100 1000 common mode dlw5btn101sq2 dlw5btn251sq2 dlw5btn501sq2 dlw5btn102sq2 dlw5btn142sq2 dlw5btn101sq2 dlw5btn251sq2 dlw5btn501sq2 dlw5btn102sq2 dlw5btn142sq2 differential mode c equivalent circuit (1) (4) (2) (3) no polarity. c packaging code packaging minimum quantity l 180mm embossed tape 700 k 330mm embossed tape 2500 b bulk(bag) 100 c rated value ( p : packaging code) part number common mode impedance (at 100mhz/20c) rated current rated voltage insulation resistance (min.) withstand voltage dc resistance operating temperature range dlw5btn101sq2 p 100ohm (typ.) 6000ma 50vdc 10m ohm 125vdc 0.009ohm40% -40 to +85c dlw5btn251sq2 p 250ohm (typ.) 5000ma 50vdc 10m ohm 125vdc 0.014ohm40% -40 to +85c dlw5btn501sq2 p 500ohm (typ.) 4000ma 50vdc 10m ohm 125vdc 0.019ohm40% -40 to +85c dlw5btn102sq2 p 1000ohm (typ.) 2000ma 50vdc 10m ohm 125vdc 0.024ohm40% -40 to +85c dlw5btn142sq2 p 1400ohm (typ.) 1500ma 50vdc 10m ohm 125vdc 0.040ohm40% -40 to +85c number of circuit: 1 continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 noise suppression products/emi suppression filters > common mode choke coil > wire wound type for large current 2012.3.1 o this data sheet is applied for chip common mode choke coil used for general electronics equipment for your design. continued from the preceding page. c derating of rated current derating of rated current in operating temperature exceeding +60c, derating of current is necessary for the following part name of dlw5bt series. please apply the derating curve shown in chart according to the operating temperature. operating temperature (c) rated current (ma) 0 1000 2000 3000 4000 5000 6000 7000 0 20406080100 65 4750 3400 85 dlw5btn101sq2 dlw5btn251sq2 dlw5btn501sq2 c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro le where peak solder temperature is below the tin melting point is used. please con rm the solderability of tin plating termination chip before use.
|
